Got the fuselage bottom skin glued and tightened. With Oratex you need to glue the skin pretty much all the way around the tubes (where possible). I flipped the fuselage back over (with some help from my son) and did the trimming of the excess and got it glued to the tubes. Pretty happy with the whole process and alot of the consternation I had about doing the covering is easing up a bit. You watch enough videos and read the instructions enough times and it seems to work. Had to order a bit more glue to finish off the fuselage so I started on the elevator. Got the right side glued but have to wait a day for the glue to set before I can fully tighten it. Certainly not as easy as the wings or what I've done on the fuselage but not crazy hard either. Made good use of the hold downs on the table saw outfeed table which made controlling the elevator while pulling on the Oratex much easier. If I hadn't had them, I would have had to wait for someone else to come hold the elevator while I did the pulling. Will start the left side tomorrow since it doesn't seem to use much glue at all to get them set up.